Fluid Loss Reducer

OV-LOSE HT Starch

Anti-high Temperature Modified Starch OV-LOSE HT is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 130℃). And ensure its good fluid loss performance under both low and high temperature. SHR is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer.

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Inquire Now

Like this page? Share it with your friends!

Description

Description

High Temperature Resistant Starch OV-LOSE HT is modified starch by inserting hydration groups and high temperature stabilizer to improve the water solubility and temperature resistance (up to 130℃). And ensure its good fluid loss performance under both low and high temperature. SHR is an environmental friendly, low viscosity, salt resistance (up to saturation) filtration reducer. Its recommend dosage is 3 - 7ppb.



Specification

Items

Specifications

  Appearance

White or light yellow free-

flowing powder

  Moisture, %

≤12.0

600 rpm viscometer reading after aid soluble

≤5.0

AV   after 130 aging,

mPa·S

40 g/l saltwater slurry

≤10


Saturated saltwater slurry

≤12

FLAPI after 130 aging,

ml

40 g/l saltwater slurry

≤15

Saturated saltwater slurry

≤20

 

Application & Advantages

Application:
OV-LOSE HT is applicable for PRD mud system for both reservoir and non-reservoir interval.

‍Advantages:

  • Reduce filtration loss effectively.

  • Increase viscosity slightly.

  • It is degradable, non-toxic and does not harm the environment.

  • Perform well up to 130℃.

  • Resist salt to saturation, reasonable calcium and magnesium resistance. so it can be applied in various drilling and completion fluids.

  • Good filtration control performance under the condition of both low and high temperature, and has wide applicable temperature range.‍

Usage:
OV-LOSE HT can be directly added in drilling fluid at a relatively slow speed. It can also be used to prepare compound solution with other additives for mud treatment or performance maintenance.  Its recommend dosage is 3 - 7ppb.

Application Temperature:
The application temperature of this drilling starch cannot exceed 130°C.



 

Package

Packaging and Storing:
Triple bag with PE lining, 25 Kg/bag
The product requires ventilation and drying, away from moisture, fire and high temperature.

Safety
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS.




 

Inquire

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

*Required.

+86-532-68872006