Low Viscosity Polymer

Products

Fluid Loss Reducer

Low Viscosity Polymer PANS

Low Viscosity Polymer Filtrate Reducer PANS can reduce the filtration loss, improve the mud cake quality, has good ability of high temperature resistance, salt and calcium contamination resistance.

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Inquire Now

Previous Next

Description

Product Description

Low viscosity Polymer PANS is the polymer fluid loss additive of amphoteric and temperature and salt resistance using redox initiator system by AM, AA, AMPS, SA and DMDAAC with water as solvent. PANS can reduce the filtration loss, improve the mud cake quality, has good ability of high temperature resistance, salt and calcium contamination resistance, PANS has low viscosity to mud system due to narrow molecular weight scale.It is especially suitable for fresh water, salt water, seawater drilling and completion fluid. The recommend dosage is 3-7ppb

Specification

Items		Specifications
Appearance		White or light yellow powder
Moisture，%		≤12.0
Apparent Viscosity (1% water solution), mPa·s		≤5.0
Effective content, %		≥70.0
FLAPI after 150℃/16h Aging, mL	Freshwater Mud	≤15.0
	Composite saltwater mud	≤15.0
AV after 150℃/16h Aging, mPa·s	Freshwater Mud	≤25.0
	Composite saltwater mud	≤7.5

Application & Advantages

Advantage

Low viscosity effect, can be used for high density drilling fluid due to slight impact to rheology.
Reduce filtration effectively with low dosage.
Improve mud cake quality and inhibit clay dispersing.
Perform well up to 150℃, can be used in deep wells.
Resist salt to saturation and resist calcium and magnesium well. It can be applied in freshwater, saltwater, saturated saltwater and seawater drilling and completion fluids
Pilot test is recommended before its used in KCl and Polyamine and other strong inhibition drilling fluids.

Package

Package and Storage
They shall be packaged in 25Kg multi-wall paper bags, They shall be stored in a shady, dry, and ventilated place.

Safety
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with water. Handling methods and dangerous data shall be referred to MSDS.

Inquire

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

＊Required.

OCEANVIEW GROUP INC.

Products

Fluid Loss Reducer